INR18650-MJ1 — célula de íon-lítio 18650
LG Energy Solution INR18650-MJ1: 3,500 mAh typical, 3.635 V nominal, 10 A discharge. The higher-capacity sibling of the MH1 at 3,500 mAh, holding the same 10 A continuous ceiling. Choose it when pack volume is fixed and runtime is the constraint.
Especificações
Parâmetros da INR18650-MJ1
| Parâmetro | Valor |
|---|---|
| Marca | LG Energy Solution |
| Modelo | INR18650-MJ1 |
| Formato | 18650 |
| Química | NMC |
| Tensão nominal | 3.635 V |
| Capacidade típica | 3,500 mAh |
| Corrente de carga padrão | 1.7 A |
| Corrente de carga máx. | 3.4 A |
| Corrente de descarga | 10 A |
| Resistência interna | AC ≤40 mΩ (1 kHz) |
| Peso | ≈49 g |
| Diâmetro | ≈18.4 mm |
| Altura | ≈65.15 mm |
| Temperatura de carga | 0 °C to 45 °C |
| Temperatura de descarga | -20 °C to 60 °C |
INR18650-MJ1 — specification and pack integration
The higher-capacity sibling of the MH1 at 3,500 mAh, holding the same 10 A continuous ceiling. Choose it when pack volume is fixed and runtime is the constraint.
What the numbers mean for a pack
- 3,500 mAh typical in a 18650 can, at 3.635 V nominal
- 10 A discharge ceiling — the pack design must hold the cell inside its temperature cut-off to use it
- 3.4 A maximum charge current sets the fastest realistic turnaround
- AC ≤40 mΩ (1 kHz) — the figure that decides voltage sag under load
Where it is used
- Flashlights, headlamps and handheld instruments
- Light-duty cordless tools
- Telecom and industrial backup packs where energy density drives cell count
Integration notes
Charge CC-CV to 4.2 V within the current limits above and stop discharge at 2.5 V. These are unprotected industrial cells: a BMS or protection circuit is required, interconnects must be resistance or laser welded rather than soldered, and cells of different model, batch or state of charge must not be mixed in one pack. Charging below 0 °C is not permitted unless the pack implements a low-temperature charge strategy.
Documentation
UN38.3 test summary, MSDS and the cell specification are available on request. Values shown here are pending verification against the manufacturer data sheet.
Specification basis: Publicly circulated LG specification — values pending verification against manufacturer datasheet
Comparar
Outras células 18650 para cotar em paralelo
| Modelo | Marca | Capacidade | Descarga | Ficha técnica |
|---|---|---|---|---|
| INR18650-35E | Samsung SDI | 3,500 mAh | 8 A | Pendente |
| INR18650-MH1 | LG Energy Solution | 3,200 mAh | 10 A | Pendente |
| INR18650-M35A | Molicel | 3,450 mAh | 10 A | Em arquivo |
| NCR18650GA | Panasonic | 3,450 mAh | 10 A | Pendente |
Capacidade e descarga são os valores que temos para cada modelo; quando não há ficha técnica do fabricante em arquivo, a linha aparece como pendente em vez de verificada.
Aplicações
Regimes de descarga para os quais esta classe de célula é especificada
Células para bicicletas elétricas, scooters e tração leve
3,500 mAh at 10 A continuous — the balanced grade traction packs are built from.
Ver o perfil de uso AplicaçãoCélulas para armazenamento residencial e comercial
3,500 mAh at low C-rate; capacity per cell is what binds in a storage enclosure.
Ver o perfil de usoRelacionado
Onde mais procurar
Precisa de INR18650-MJ1 em volume?
Confirme disponibilidade, documentação de lote e prazo de entrega antes de fechar o projeto.