INR18650-35E — célula de íon-lítio 18650
Samsung SDI INR18650-35E: 3,500 mAh nominal (3,350 mAh minimum), 3.6 V nominal, 8 A continuous discharge, 50.0 g max, initial AC impedance at or below 35 mΩ.
Especificações
Parâmetros da INR18650-35E
| Parâmetro | Valor |
|---|---|
| Marca | Samsung SDI |
| Modelo | INR18650-35E |
| Formato | 18650 |
| Química | NMC |
| Tensão nominal | 3.6 V |
| Capacidade típica | 3,500 mAh |
| Corrente de descarga | 8 A |
Sobre o Samsung SDI INR18650-35E 18650 Li-ion Cell 3,500 mAh 8 A
The INR18650-35E is the capacity end of Samsung's 18650 range: 3,500 mAh at 8 A continuous. Specify it where runtime per cell is the design driver and peak current stays modest — solar lighting, remote monitoring, medical devices, anything that discharges slowly for hours.
Why pack builders specify it
- 3,500 mAh nominal, 1,000 mAh more than the 25R in the same 18650 can
- 8 A continuous covers the large majority of sensor, lighting and portable electronics loads
- Low self-discharge suits equipment that sits idle between uses
- Long production run and wide availability keep pack cost predictable
Typical applications
- Solar and area lighting – Overnight runtime per cell drives the design; discharge is a fraction of an amp
- Power banks and portable electronics – Maximum stored energy in a standard 18650 holder
- Medical and monitoring devices – Infusion pumps, portable monitors and diagnostic handhelds with steady low draw
- Remote sensors and IoT – Long deployment intervals between service visits
Where it fits
Choose the 35E for capacity-first designs under 8 A. Above that, the 30Q covers up to 15 A and the 25R up to 20 A. Do not put the 35E in a high-drain tool or drone pack — the impedance is too high and the cell will run hot.
Charging and pack integration
Charge CC-CV to 4.2 V within the current limits listed above and stop discharge at 2.5 V. These are unprotected industrial cells: a BMS or protection circuit is required, interconnects must be resistance or laser welded rather than soldered, and cells of different model, batch or state of charge must not be mixed in one pack. Charging below 0 °C is not permitted unless the pack implements a low-temperature charge strategy.
Certifications and documentation
UN38.3, MSDS, IEC 62133-2, UL 1642, CE, RoHS, REACH, PSE, KC, BIS, CB. UN38.3 test summary, MSDS and the cell specification are available on request.
Packaging
| Quantity per box | 200 pcs |
|---|---|
| Gross weight per box | 11.2 kg |
Specification basis: Official Samsung SDI spec + cross-checked.
Perguntas sobre esta célula
Comparar
Outras células 18650 para cotar em paralelo
| Modelo | Marca | Capacidade | Descarga | Ficha técnica |
|---|---|---|---|---|
| INR18650-MJ1 | LG Energy Solution | 3,500 mAh | 10 A | Pendente |
| INR18650-30Q | Samsung SDI | 3,000 mAh | 15 A | Pendente |
| INR18650-M35A | Molicel | 3,450 mAh | 10 A | Em arquivo |
| INR18650-25R | Samsung SDI | 2,500 mAh | 20 A | Pendente |
Capacidade e descarga são os valores que temos para cada modelo; quando não há ficha técnica do fabricante em arquivo, a linha aparece como pendente em vez de verificada.
Aplicações
Regimes de descarga para os quais esta classe de célula é especificada
Relacionado
Onde mais procurar
Precisa de INR18650-35E em volume?
Confirme disponibilidade, documentação de lote e prazo de entrega antes de fechar o projeto.