INR18650-MH1 — célula de íon-lítio 18650
LG Energy Solution INR18650-MH1: 3,200 mAh typical (3,100 mAh minimum), 3.67 V nominal, 10 A discharge. A 3,200 mAh 18650 aimed at runtime: 10 A maximum continuous discharge, with cycle life rather than current capability as the design emphasis.
Especificações
Parâmetros da INR18650-MH1
| Parâmetro | Valor |
|---|---|
| Marca | LG Energy Solution |
| Modelo | INR18650-MH1 |
| Formato | 18650 |
| Química | NMC |
| Tensão nominal | 3.67 V |
| Capacidade típica | 3,200 mAh / 11.5 Wh |
| Capacidade mínima | 3,100 mAh |
| Corrente de carga padrão | 1.55 A |
| Corrente de carga máx. | 3.1 A |
| Corrente de descarga | 10 A |
| Resistência interna | AC ≤40 mΩ (1 kHz) |
| Peso | ≈48 g |
| Diâmetro | ≈18.4 mm |
| Altura | ≈65.15 mm |
| Temperatura de carga | 0 °C to 45 °C |
| Temperatura de descarga | -20 °C to 60 °C |
INR18650-MH1 — specification and pack integration
A 3,200 mAh 18650 aimed at runtime: 10 A maximum continuous discharge, with cycle life rather than current capability as the design emphasis.
What the numbers mean for a pack
- 3,200 mAh typical in a 18650 can, at 3.67 V nominal
- 10 A discharge ceiling — the pack design must hold the cell inside its temperature cut-off to use it
- 3.1 A maximum charge current sets the fastest realistic turnaround
- AC ≤40 mΩ (1 kHz) — the figure that decides voltage sag under load
Where it is used
- E-bike and light mobility packs with moderate controller limits
- Power banks and portable medical devices
- Small stationary storage and UPS modules
Integration notes
Charge CC-CV to 4.2 V within the current limits above and stop discharge at 2.5 V. These are unprotected industrial cells: a BMS or protection circuit is required, interconnects must be resistance or laser welded rather than soldered, and cells of different model, batch or state of charge must not be mixed in one pack. Charging below 0 °C is not permitted unless the pack implements a low-temperature charge strategy.
Documentation
UN38.3 test summary, MSDS and the cell specification are available on request. Values shown here are pending verification against the manufacturer data sheet.
Specification basis: Publicly circulated LG specification — values pending verification against manufacturer datasheet
Comparar
Outras células 18650 para cotar em paralelo
| Modelo | Marca | Capacidade | Descarga | Ficha técnica |
|---|---|---|---|---|
| NCR18650BD | Panasonic | 3,180 mAh | — | Pendente |
| INR18650-MJ1 | LG Energy Solution | 3,500 mAh | 10 A | Pendente |
| INR18650-M30A | Molicel | 3,000 mAh | 10 A | Em arquivo |
| INR18650-30Q | Samsung SDI | 3,000 mAh | 15 A | Pendente |
Capacidade e descarga são os valores que temos para cada modelo; quando não há ficha técnica do fabricante em arquivo, a linha aparece como pendente em vez de verificada.
Aplicações
Regimes de descarga para os quais esta classe de célula é especificada
Células para bicicletas elétricas, scooters e tração leve
3,200 mAh at 10 A continuous — the balanced grade traction packs are built from.
Ver o perfil de uso AplicaçãoCélulas para armazenamento residencial e comercial
3,200 mAh at low C-rate; capacity per cell is what binds in a storage enclosure.
Ver o perfil de usoRelacionado
Onde mais procurar
Precisa de INR18650-MH1 em volume?
Confirme disponibilidade, documentação de lote e prazo de entrega antes de fechar o projeto.