INR18650-35E — литий-ионный элемент 18650
Samsung SDI INR18650-35E: 3,500 mAh nominal (3,350 mAh minimum), 3.6 V nominal, 8 A continuous discharge, 50.0 g max, initial AC impedance at or below 35 mΩ.
Характеристики
Параметры модели INR18650-35E
| Параметр | Значение |
|---|---|
| Бренд | Samsung SDI |
| Модель | INR18650-35E |
| Формат | 18650 |
| Химия | NMC |
| Номинальное напряжение | 3.6 V |
| Типичная ёмкость | 3,500 mAh |
| Ток непрерывного разряда | 8 A |
About the Samsung SDI INR18650-35E 18650 Li-ion Cell 3,500 mAh 8 A
The INR18650-35E is the capacity end of Samsung's 18650 range: 3,500 mAh at 8 A continuous. Specify it where runtime per cell is the design driver and peak current stays modest — solar lighting, remote monitoring, medical devices, anything that discharges slowly for hours.
Why pack builders specify it
- 3,500 mAh nominal, 1,000 mAh more than the 25R in the same 18650 can
- 8 A continuous covers the large majority of sensor, lighting and portable electronics loads
- Low self-discharge suits equipment that sits idle between uses
- Long production run and wide availability keep pack cost predictable
Typical applications
- Solar and area lighting – Overnight runtime per cell drives the design; discharge is a fraction of an amp
- Power banks and portable electronics – Maximum stored energy in a standard 18650 holder
- Medical and monitoring devices – Infusion pumps, portable monitors and diagnostic handhelds with steady low draw
- Remote sensors and IoT – Long deployment intervals between service visits
Where it fits
Choose the 35E for capacity-first designs under 8 A. Above that, the 30Q covers up to 15 A and the 25R up to 20 A. Do not put the 35E in a high-drain tool or drone pack — the impedance is too high and the cell will run hot.
Charging and pack integration
Charge CC-CV to 4.2 V within the current limits listed above and stop discharge at 2.5 V. These are unprotected industrial cells: a BMS or protection circuit is required, interconnects must be resistance or laser welded rather than soldered, and cells of different model, batch or state of charge must not be mixed in one pack. Charging below 0 °C is not permitted unless the pack implements a low-temperature charge strategy.
Certifications and documentation
UN38.3, MSDS, IEC 62133-2, UL 1642, CE, RoHS, REACH, PSE, KC, BIS, CB. UN38.3 test summary, MSDS and the cell specification are available on request.
Packaging
| Quantity per box | 200 pcs |
|---|---|
| Gross weight per box | 11.2 kg |
Specification basis: Official Samsung SDI spec + cross-checked.
Вопросы по этому элементу
Сравнение
Другие элементы 18650 для сравнения в запросах
| Модель | Бренд | Ёмкость | Разряд | Datasheet |
|---|---|---|---|---|
| INR18650-MJ1 | LG Energy Solution | 3,500 mAh | 10 A | Ожидает |
| INR18650-30Q | Samsung SDI | 3,000 mAh | 15 A | Ожидает |
| INR18650-M35A | Molicel | 3,450 mAh | 10 A | Datasheet |
| INR18650-25R | Samsung SDI | 2,500 mAh | 20 A | Ожидает |
Ёмкость и ток разряда — значения, которые у нас есть по каждой модели. Где технического паспорта производителя нет, строка помечена как ожидающая, а не выдана за проверенную.
Применения
Нагрузочные режимы, под которые рассчитан этот класс элемента
См. также
Где искать дальше
Нужен INR18650-35E крупной партией?
Подтвердим наличие, документы по партии и срок поставки — до того, как вы зафиксируете конструкцию.