INR18650-MH1 — celda de ion-litio 18650
LG Energy Solution INR18650-MH1: 3,200 mAh typical (3,100 mAh minimum), 3.67 V nominal, 10 A discharge. A 3,200 mAh 18650 aimed at runtime: 10 A maximum continuous discharge, with cycle life rather than current capability as the design emphasis.
Especificaciones
Parámetros de INR18650-MH1
| Parámetro | Valor |
|---|---|
| Marca | LG Energy Solution |
| Modelo | INR18650-MH1 |
| Formato | 18650 |
| Química | NMC |
| Tensión nominal | 3.67 V |
| Capacidad típica | 3,200 mAh / 11.5 Wh |
| Capacidad mínima | 3,100 mAh |
| Corriente de carga estándar | 1.55 A |
| Corriente de carga máx. | 3.1 A |
| Corriente de descarga | 10 A |
| Resistencia interna | AC ≤40 mΩ (1 kHz) |
| Peso | ≈48 g |
| Diámetro | ≈18.4 mm |
| Altura | ≈65.15 mm |
| Temperatura de carga | 0 °C to 45 °C |
| Temperatura de descarga | -20 °C to 60 °C |
INR18650-MH1 — specification and pack integration
A 3,200 mAh 18650 aimed at runtime: 10 A maximum continuous discharge, with cycle life rather than current capability as the design emphasis.
What the numbers mean for a pack
- 3,200 mAh typical in a 18650 can, at 3.67 V nominal
- 10 A discharge ceiling — the pack design must hold the cell inside its temperature cut-off to use it
- 3.1 A maximum charge current sets the fastest realistic turnaround
- AC ≤40 mΩ (1 kHz) — the figure that decides voltage sag under load
Where it is used
- E-bike and light mobility packs with moderate controller limits
- Power banks and portable medical devices
- Small stationary storage and UPS modules
Integration notes
Charge CC-CV to 4.2 V within the current limits above and stop discharge at 2.5 V. These are unprotected industrial cells: a BMS or protection circuit is required, interconnects must be resistance or laser welded rather than soldered, and cells of different model, batch or state of charge must not be mixed in one pack. Charging below 0 °C is not permitted unless the pack implements a low-temperature charge strategy.
Documentation
UN38.3 test summary, MSDS and the cell specification are available on request. Values shown here are pending verification against the manufacturer data sheet.
Specification basis: Publicly circulated LG specification — values pending verification against manufacturer datasheet
Comparativa
Otras celdas 18650 con las que comparar presupuesto
| Modelo | Marca | Capacidad | Descarga | Ficha técnica |
|---|---|---|---|---|
| NCR18650BD | Panasonic | 3,180 mAh | — | Pendiente |
| INR18650-MJ1 | LG Energy Solution | 3,500 mAh | 10 A | Pendiente |
| INR18650-M30A | Molicel | 3,000 mAh | 10 A | En archivo |
| INR18650-30Q | Samsung SDI | 3,000 mAh | 15 A | Pendiente |
Las cifras de capacidad y descarga son los valores que constan para cada modelo; cuando no se dispone de la ficha técnica del fabricante, la fila figura como pendiente en lugar de presentarse como verificada.
Aplicaciones
Servicios para los que se especifica este grado de celda
Celdas para bicicletas eléctricas, scooters y tracción ligera
3,200 mAh at 10 A continuous — the balanced grade traction packs are built from.
Ver el perfil de servicio AplicaciónCeldas para almacenamiento residencial y comercial
3,200 mAh at low C-rate; capacity per cell is what binds in a storage enclosure.
Ver el perfil de servicioRelacionado
Otras vías de búsqueda
¿Necesita INR18650-MH1 en volumen?
Confirme disponibilidad, documentación de lote y plazo de entrega antes de cerrar el diseño.