INR18650-M30A — celda de ion-litio 18650
Molicel INR18650-M30A: 3,000 mAh typical (2,900 mAh minimum), 3.6 V nominal, 10 A discharge. A 3,000 mAh 18650 built for runtime rather than burst current: 10 A maximum discharge and 2.5-hour standard charge suit packs that draw steadily instead of in peaks.
Especificaciones
Parámetros de INR18650-M30A
| Parámetro | Valor |
|---|---|
| Marca | Molicel |
| Modelo | INR18650-M30A |
| Formato | 18650 |
| Química | NMC |
| Tensión nominal | 3.6 V |
| Capacidad típica | 3,000 mAh / 10.8 Wh |
| Capacidad mínima | 2,900 mAh |
| Corriente de carga estándar | 1.5 A |
| Corriente de carga máx. | 3.0 A |
| Corriente de descarga | 10 A |
| Resistencia interna | AC 21 mΩ (1 kHz, typ.) |
| Densidad energética | 632 Wh/L · 234 Wh/kg |
| Peso | 48 g (Max) |
| Diámetro | 18.6 mm (Max) |
| Altura | 65.2 mm (Max) |
| Temperatura de carga | 0 °C to 60 °C |
| Temperatura de descarga | -30 °C to 60 °C |
INR18650-M30A — specification and pack integration
A 3,000 mAh 18650 built for runtime rather than burst current: 10 A maximum discharge and 2.5-hour standard charge suit packs that draw steadily instead of in peaks.
What the numbers mean for a pack
- 3,000 mAh typical in a 18650 can, at 3.6 V nominal
- 10 A discharge ceiling — the pack design must hold the cell inside its temperature cut-off to use it
- 3.0 A maximum charge current sets the fastest realistic turnaround
- 632 Wh/L · 234 Wh/kg
- AC 21 mΩ (1 kHz, typ.) — the figure that decides voltage sag under load
Where it is used
- Medical and instrumentation packs — steady drains where cycle count matters more than peak current
- Portable power banks and backup modules — 10.8 Wh per cell keeps parallel counts reasonable
- Light-duty mobility packs — scooters and e-bikes with moderate controller limits
Integration notes
Charge CC-CV to 4.2 V within the current limits above and stop discharge at 2.5 V. These are unprotected industrial cells: a BMS or protection circuit is required, interconnects must be resistance or laser welded rather than soldered, and cells of different model, batch or state of charge must not be mixed in one pack. Charging below 0 °C is not permitted unless the pack implements a low-temperature charge strategy.
Documentation
The manufacturer product data sheet for this model is available for download on this page. UN38.3 test summary, MSDS and transport documentation are supplied with shipment.
Specification basis: Molicel Product Data Sheet, model INR-18650-M30A
Comparativa
Otras celdas 18650 con las que comparar presupuesto
| Modelo | Marca | Capacidad | Descarga | Ficha técnica |
|---|---|---|---|---|
| INR18650-30Q | Samsung SDI | 3,000 mAh | 15 A | Pendiente |
| INR18650-P30B | Molicel | 3,000 mAh | 30 A | En archivo |
| NCR18650BD | Panasonic | 3,180 mAh | — | Pendiente |
| INR18650-P30S | Molicel | 3,000 mAh | 36 A | En archivo |
Las cifras de capacidad y descarga son los valores que constan para cada modelo; cuando no se dispone de la ficha técnica del fabricante, la fila figura como pendiente en lugar de presentarse como verificada.
Aplicaciones
Servicios para los que se especifica este grado de celda
Celdas para bicicletas eléctricas, scooters y tracción ligera
3,000 mAh at 10 A continuous — the balanced grade traction packs are built from.
Ver el perfil de servicio AplicaciónCeldas para dispositivos médicos e instrumentación
3,000 mAh at 10 A, and the manufacturer data sheet is held on file for traceability.
Ver el perfil de servicioRelacionado
Otras vías de búsqueda
¿Necesita INR18650-M30A en volumen?
Confirme disponibilidad, documentación de lote y plazo de entrega antes de cerrar el diseño.