Ir al contenido

INR18650-30Q — celda de ion-litio 18650

Samsung SDI INR18650-30Q: 3,000 mAh nominal (2,980 mAh minimum), 3.6 V nominal, 15 A continuous discharge, 48.0 g max, initial AC impedance at or below 26 mΩ.

Samsung SDI18650NMC3.6 V3,000 mAh15 A de descarga

Especificaciones

Parámetros de INR18650-30Q

ParámetroValor
MarcaSamsung SDI
ModeloINR18650-30Q
Formato18650
QuímicaNMC
Tensión nominal3.6 V
Capacidad típica3,000 mAh
Corriente de descarga15 A

Acerca de Samsung SDI INR18650-30Q 18650 Li-ion Cell 3,000 mAh 15 A

The INR18650-30Q sits between the 25R and the 35E: 3,000 mAh with a 15 A continuous rating. That combination is why it shows up in builds with mixed duty — long enough runtime for a shift, enough current to cover acceleration, motor start or a turbo mode.

Why pack builders specify it

  • 3,000 mAh at 15 A, the middle option between the 20 A/2,500 mAh 25R and the 8 A/3,500 mAh 35E
  • Initial AC impedance at or below 26 mΩ, adequate for regulated loads up to the rating
  • Standard charge 1.5 A with 4 A maximum for reasonable turnaround
  • Heavily documented and widely stocked, so matched batches and replacement stock are easy to source

Typical applications

  • E-bike and pedelec packs – 13S4P and similar builds where average draw per cell stays under 5 A with short peaks
  • Flashlights – Good runtime-to-output balance for lights that are not run permanently at maximum
  • Robotics and AGVs – Mixed duty of cruise current plus periodic peak torque
  • General-purpose packs – Where one cell type has to cover several products in a range

Where it fits

Default to the 30Q when the duty profile is mixed and you do not want to choose between current and runtime. Move to the 25R for loads that live above 15 A per cell, and to the 35E when the pack rarely exceeds 8 A.

Charging and pack integration

Charge CC-CV to 4.2 V within the current limits listed above and stop discharge at 2.5 V. These are unprotected industrial cells: a BMS or protection circuit is required, interconnects must be resistance or laser welded rather than soldered, and cells of different model, batch or state of charge must not be mixed in one pack. Charging below 0 °C is not permitted unless the pack implements a low-temperature charge strategy.

Certifications and documentation

UN38.3, MSDS, IEC 62133-2, UL 1642, CE, RoHS, REACH, PSE, KC, BIS, CB. UN38.3 test summary, MSDS and the cell specification are available on request.

Packaging

Quantity per box200 pcs
Gross weight per box10.8 kg

Specification basis: Official Samsung SDI spec + cross-checked.

Preguntas sobre esta celda

25R for sustained 20 A per cell; 30Q for 15 A with 500 mAh more capacity. Above 15 A continuous, the 30Q is the wrong cell.
13S gives 46.8 V nominal. 13S4P is 52 cells at 12 Ah and about 560 Wh; check peak motor current against 15 A per parallel string.
No. It is an unprotected industrial cell and needs a BMS or protection circuit in the pack.

Comparativa

Otras celdas 18650 con las que comparar presupuesto

Modelo Marca Capacidad Descarga Ficha técnica
INR18650-M30A Molicel 3,000 mAh 10 A En archivo
INR18650-25R Samsung SDI 2,500 mAh 20 A Pendiente
INR18650-P30B Molicel 3,000 mAh 30 A En archivo
INR18650-35E Samsung SDI 3,500 mAh 8 A Pendiente

Las cifras de capacidad y descarga son los valores que constan para cada modelo; cuando no se dispone de la ficha técnica del fabricante, la fila figura como pendiente en lugar de presentarse como verificada.

¿Necesita INR18650-30Q en volumen?

Confirme disponibilidad, documentación de lote y plazo de entrega antes de cerrar el diseño.

Solicitar presupuesto
WhatsApp