NCR2270A — célula de íon-lítio 22700
Panasonic NCR2270A: 5,635 mAh typical (5,435 mAh minimum), 3.6 V nominal, high-capacity middle-rate discharge type, 74.5 g max, 21.8 mm diameter by 70.9 mm height without tube. Panasonic positions it for light electric vehicles and robotics.
Especificações
Parâmetros da NCR2270A
| Parâmetro | Valor |
|---|---|
| Marca | Panasonic |
| Modelo | NCR2270A |
| Formato | 22700 |
| Química | NCA |
| Tensão nominal | 3.6 V |
| Capacidade típica | 5,635 mAh |
Sobre o Panasonic NCR2270A 22700 Li-ion Cell 5,635 mAh
The NCR2270A is Panasonic's 22 mm-format cell at 5,635 mAh typical and 5,435 mAh minimum. Panasonic classifies it as high capacity with middle-rate discharge and names its target uses directly: e-assist bicycles, e-motorcycles and karts under light electric vehicles, plus powered equipment and robotics.
Why pack builders specify it
- 5,635 mAh typical, the largest capacity in this range by a wide margin
- 21.8 mm diameter against 21 mm for 21700, so fewer cells are needed for a given pack capacity
- Panasonic classifies it as high capacity with middle-rate discharge, matched to LEV duty
- Named by Panasonic for e-bikes, e-motorcycles, karts, powered equipment and robotics
Typical applications
- E-assist bicycles and e-motorcycles – Panasonic's stated LEV application, including pedelecs and karts
- Robotics and AMRs – Long shift runtime with moderate current draw
- Cordless garden and powered equipment – Mowers and similar tools where run time dominates
- Industrial ESS and UPS – High watt-hours per cell reduces cell count and BMS channels
Where it fits
Use the NCR2270A where pack capacity per cell is the constraint and the duty is moderate — LEV, robots, ESS. It is not a high-power cell; Panasonic's mid-rate classification and the absence of a published continuous rating mean high-drain work should go to a Molicel P-series or Samsung 40T. Confirm the maximum continuous discharge against the Panasonic datasheet before you finalise the BMS.
Charging and pack integration
Charge CC-CV to 4.2 V (4.10 V variant for cycle life) within the current limits listed above and stop discharge at 2.5 V. These are unprotected industrial cells: a BMS or protection circuit is required, interconnects must be resistance or laser welded rather than soldered, and cells of different model, batch or state of charge must not be mixed in one pack. Charging below 0 °C is not permitted unless the pack implements a low-temperature charge strategy.
Certifications and documentation
UN38.3, MSDS, IEC 62133-2, CE, RoHS, REACH, PSE, KC. UN38.3 test summary, MSDS and the cell specification are available on request.
Packaging
| Quantity per box | 100 pcs |
|---|---|
| Gross weight per box | 7.2 kg |
| Box dimensions | 300 × 250 × 180 mm |
Specification basis: Model name corrected to NCR2270A; official Panasonic capacity/dimensions, discharge TBC.
Perguntas sobre esta célula
Comparar
Outras células desta categoria
| Modelo | Marca | Formato | Capacidade | Descarga | Ficha técnica |
|---|---|---|---|---|---|
| NCR18500A | Panasonic | 18500 | 2,040 mAh | — | Pendente |
Capacidade e descarga são os valores que temos para cada modelo; quando não há ficha técnica do fabricante em arquivo, a linha aparece como pendente em vez de verificada.
Aplicações
Regimes de descarga para os quais esta classe de célula é especificada
Relacionado
Onde mais procurar
Precisa de NCR2270A em volume?
Confirme disponibilidade, documentação de lote e prazo de entrega antes de fechar o projeto.