INR18650-30Q — литий-ионный элемент 18650
Samsung SDI INR18650-30Q: 3,000 mAh nominal (2,980 mAh minimum), 3.6 V nominal, 15 A continuous discharge, 48.0 g max, initial AC impedance at or below 26 mΩ.
Характеристики
Параметры модели INR18650-30Q
| Параметр | Значение |
|---|---|
| Бренд | Samsung SDI |
| Модель | INR18650-30Q |
| Формат | 18650 |
| Химия | NMC |
| Номинальное напряжение | 3.6 V |
| Типичная ёмкость | 3,000 mAh |
| Ток непрерывного разряда | 15 A |
About the Samsung SDI INR18650-30Q 18650 Li-ion Cell 3,000 mAh 15 A
The INR18650-30Q sits between the 25R and the 35E: 3,000 mAh with a 15 A continuous rating. That combination is why it shows up in builds with mixed duty — long enough runtime for a shift, enough current to cover acceleration, motor start or a turbo mode.
Why pack builders specify it
- 3,000 mAh at 15 A, the middle option between the 20 A/2,500 mAh 25R and the 8 A/3,500 mAh 35E
- Initial AC impedance at or below 26 mΩ, adequate for regulated loads up to the rating
- Standard charge 1.5 A with 4 A maximum for reasonable turnaround
- Heavily documented and widely stocked, so matched batches and replacement stock are easy to source
Typical applications
- E-bike and pedelec packs – 13S4P and similar builds where average draw per cell stays under 5 A with short peaks
- Flashlights – Good runtime-to-output balance for lights that are not run permanently at maximum
- Robotics and AGVs – Mixed duty of cruise current plus periodic peak torque
- General-purpose packs – Where one cell type has to cover several products in a range
Where it fits
Default to the 30Q when the duty profile is mixed and you do not want to choose between current and runtime. Move to the 25R for loads that live above 15 A per cell, and to the 35E when the pack rarely exceeds 8 A.
Charging and pack integration
Charge CC-CV to 4.2 V within the current limits listed above and stop discharge at 2.5 V. These are unprotected industrial cells: a BMS or protection circuit is required, interconnects must be resistance or laser welded rather than soldered, and cells of different model, batch or state of charge must not be mixed in one pack. Charging below 0 °C is not permitted unless the pack implements a low-temperature charge strategy.
Certifications and documentation
UN38.3, MSDS, IEC 62133-2, UL 1642, CE, RoHS, REACH, PSE, KC, BIS, CB. UN38.3 test summary, MSDS and the cell specification are available on request.
Packaging
| Quantity per box | 200 pcs |
|---|---|
| Gross weight per box | 10.8 kg |
Specification basis: Official Samsung SDI spec + cross-checked.
Вопросы по этому элементу
Сравнение
Другие элементы 18650 для сравнения в запросах
| Модель | Бренд | Ёмкость | Разряд | Datasheet |
|---|---|---|---|---|
| INR18650-M30A | Molicel | 3,000 mAh | 10 A | Datasheet |
| INR18650-25R | Samsung SDI | 2,500 mAh | 20 A | Ожидает |
| INR18650-P30B | Molicel | 3,000 mAh | 30 A | Datasheet |
| INR18650-35E | Samsung SDI | 3,500 mAh | 8 A | Ожидает |
Ёмкость и ток разряда — значения, которые у нас есть по каждой модели. Где технического паспорта производителя нет, строка помечена как ожидающая, а не выдана за проверенную.
Применения
Нагрузочные режимы, под которые рассчитан этот класс элемента
См. также
Где искать дальше
Нужен INR18650-30Q крупной партией?
Подтвердим наличие, документы по партии и срок поставки — до того, как вы зафиксируете конструкцию.