INR18650-P30S — celda de ion-litio 18650
Molicel INR18650-P30S: 3,000 mAh typical (2,900 mAh minimum), 3.6 V nominal, 36 A discharge. 3,000 mAh at 36 A standard discharge with a 150 W maximum power rating at an 83 °C cut-off — the highest combined capacity-and-power figure in the Molicel 18650 line.
Especificaciones
Parámetros de INR18650-P30S
| Parámetro | Valor |
|---|---|
| Marca | Molicel |
| Modelo | INR18650-P30S |
| Formato | 18650 |
| Química | NMC |
| Tensión nominal | 3.6 V |
| Capacidad típica | 3,000 mAh / 10.8 Wh |
| Capacidad mínima | 2,900 mAh |
| Corriente de carga estándar | 3 A |
| Corriente de carga máx. | 6 A |
| Corriente de descarga | 36 A |
| Potencia de descarga de pico | 150 W (max, 83 °C cut-off) |
| Resistencia interna | AC 6.5 mΩ (30% SOC) · DC 14.5 mΩ (50% SOC) |
| Densidad energética | 631 Wh/L · 234 Wh/kg |
| Peso | 48 g (Max) |
| Diámetro | 18.6 mm (Max) |
| Altura | 65.2 mm (Max) |
| Temperatura de carga | -20 °C to 60 °C |
| Temperatura de descarga | -40 °C to 60 °C |
INR18650-P30S — specification and pack integration
3,000 mAh at 36 A standard discharge with a 150 W maximum power rating at an 83 °C cut-off — the highest combined capacity-and-power figure in the Molicel 18650 line.
What the numbers mean for a pack
- 3,000 mAh typical in a 18650 can, at 3.6 V nominal
- 36 A discharge ceiling — the pack design must hold the cell inside its temperature cut-off to use it
- 6 A maximum charge current sets the fastest realistic turnaround
- 631 Wh/L · 234 Wh/kg
- AC 6.5 mΩ (30% SOC) · DC 14.5 mΩ (50% SOC) — the figure that decides voltage sag under load
Where it is used
- Heavy-lift and cargo drones — 150 W peak per cell reduces parallel count
- Motorsport and off-road two-wheeler packs
- High-end garden and power tools running sustained heavy loads
Integration notes
Charge CC-CV to 4.2 V within the current limits above and stop discharge at 2.5 V. These are unprotected industrial cells: a BMS or protection circuit is required, interconnects must be resistance or laser welded rather than soldered, and cells of different model, batch or state of charge must not be mixed in one pack. Charging below 0 °C is not permitted unless the pack implements a low-temperature charge strategy.
Documentation
The manufacturer product data sheet for this model is available for download on this page. UN38.3 test summary, MSDS and transport documentation are supplied with shipment.
Specification basis: Molicel Product Data Sheet, model INR-18650-P30S (v1.1)
Comparativa
Otras celdas 18650 con las que comparar presupuesto
| Modelo | Marca | Capacidad | Descarga | Ficha técnica |
|---|---|---|---|---|
| INR18650-30Q | Samsung SDI | 3,000 mAh | 15 A | Pendiente |
| INR18650-P30B | Molicel | 3,000 mAh | 30 A | En archivo |
| NCR18650BD | Panasonic | 3,180 mAh | — | Pendiente |
| INR18650-M30A | Molicel | 3,000 mAh | 10 A | En archivo |
Las cifras de capacidad y descarga son los valores que constan para cada modelo; cuando no se dispone de la ficha técnica del fabricante, la fila figura como pendiente en lugar de presentarse como verificada.
Aplicaciones
Servicios para los que se especifica este grado de celda
Relacionado
Otras vías de búsqueda
¿Necesita INR18650-P30S en volumen?
Confirme disponibilidad, documentación de lote y plazo de entrega antes de cerrar el diseño.