Ir para o conteúdo

NCA653864SA — célula de íon-lítio Prismatic

Panasonic NCA653864SA: 2,400 mAh typical (2,330 mAh minimum), 3.6 V nominal, slim prismatic 6.50 × 38.10 × 64.60 mm, 37.0 g max. Panasonic's slim-format cell for enclosures where thickness is the binding constraint.

PanasonicPrismaticNCA3.6 V2,400 mAh

Especificações

Parâmetros da NCA653864SA

ParâmetroValor
MarcaPanasonic
ModeloNCA653864SA
FormatoPrismatic
QuímicaNCA
Tensão nominal3.6 V
Capacidade típica2,400 mAh

Sobre o Panasonic NCA653864SA Prismatic Li-ion Cell 2,400 mAh

The NCA653864SA is a slim prismatic cell at 6.5 mm thick carrying 2,400 mAh. It is specified for products whose thickness budget is measured in single millimetres — ultra-thin terminals, industrial PDAs, portable diagnostic equipment — and it holds more capacity than a same-thickness pouch of older design.

Why pack builders specify it

  • 6.5 mm thickness fits enclosures that cannot take a cylindrical or standard prismatic cell
  • 2,400 mAh from a flat 38.1 × 64.6 mm footprint
  • 37.0 g keeps handheld and wearable-adjacent devices light
  • Rectangular format leaves no dead volume in a flat product

Typical applications

  • Ultra-thin terminals – Handheld devices where total thickness is the design constraint
  • Medical diagnostics – Portable analyzers and monitoring devices with a flat internal bay
  • Industrial PDAs – Rugged handheld computing with limited depth
  • Security and alarm panels – Slim backup cells behind a wall-mounted enclosure

Where it fits

Choose the NCA653864SA when thickness is the hard limit and the product is flat. Confirm the maximum continuous discharge and the mechanical support requirement against the Panasonic datasheet before finalising the design — neither is published on the product page.

Charging and pack integration

Charge CC-CV to 4.2 V within the current limits listed above and stop discharge at 2.5 V. These are unprotected industrial cells: a BMS or protection circuit is required, interconnects must be resistance or laser welded rather than soldered, and cells of different model, batch or state of charge must not be mixed in one pack. Charging below 0 °C is not permitted unless the pack implements a low-temperature charge strategy.

Certifications and documentation

UN38.3, MSDS, IEC 62133-2, CE, RoHS, REACH, PSE, KC. UN38.3 test summary, MSDS and the cell specification are available on request.

Packaging

Quantity per box200 pcs
Gross weight per box8.5 kg
Box dimensions350 × 250 × 150 mm

Specification basis: Model name corrected to NCA653864SA; official Panasonic capacity/dimensions, discharge TBC.

Perguntas sobre esta célula

6.50 mm thick in a 38.10 × 64.60 mm footprint, at 37.0 g with 2,400 mAh typical capacity.
Not published on the Panasonic product page. Confirm against the datasheet before setting BMS limits.
Prismatic cells are normally built into a frame or held under light compression to control swelling. Confirm the requirement in the datasheet.

Comparar

Outras células Prismatic para cotar em paralelo

Modelo Marca Capacidade Descarga Ficha técnica
NCA103450 Panasonic 2,350 mAh — Pendente

Capacidade e descarga são os valores que temos para cada modelo; quando não há ficha técnica do fabricante em arquivo, a linha aparece como pendente em vez de verificada.

Relacionado

Onde mais procurar

Células 18650 Células 21700 Células 18500 e 22700 Todas as células Panasonic Guia de seleção de células

Precisa de NCA653864SA em volume?

Confirme disponibilidade, documentação de lote e prazo de entrega antes de fechar o projeto.

Solicitar orçamento
WhatsApp