Ir al contenido

NCA653864SA — celda de ion-litio Prismatic

Panasonic NCA653864SA: 2,400 mAh typical (2,330 mAh minimum), 3.6 V nominal, slim prismatic 6.50 × 38.10 × 64.60 mm, 37.0 g max. Panasonic's slim-format cell for enclosures where thickness is the binding constraint.

PanasonicPrismaticNCA3.6 V2,400 mAh

Especificaciones

Parámetros de NCA653864SA

ParámetroValor
MarcaPanasonic
ModeloNCA653864SA
FormatoPrismatic
QuímicaNCA
Tensión nominal3.6 V
Capacidad típica2,400 mAh

Acerca de Panasonic NCA653864SA Prismatic Li-ion Cell 2,400 mAh

The NCA653864SA is a slim prismatic cell at 6.5 mm thick carrying 2,400 mAh. It is specified for products whose thickness budget is measured in single millimetres — ultra-thin terminals, industrial PDAs, portable diagnostic equipment — and it holds more capacity than a same-thickness pouch of older design.

Why pack builders specify it

  • 6.5 mm thickness fits enclosures that cannot take a cylindrical or standard prismatic cell
  • 2,400 mAh from a flat 38.1 × 64.6 mm footprint
  • 37.0 g keeps handheld and wearable-adjacent devices light
  • Rectangular format leaves no dead volume in a flat product

Typical applications

  • Ultra-thin terminals – Handheld devices where total thickness is the design constraint
  • Medical diagnostics – Portable analyzers and monitoring devices with a flat internal bay
  • Industrial PDAs – Rugged handheld computing with limited depth
  • Security and alarm panels – Slim backup cells behind a wall-mounted enclosure

Where it fits

Choose the NCA653864SA when thickness is the hard limit and the product is flat. Confirm the maximum continuous discharge and the mechanical support requirement against the Panasonic datasheet before finalising the design — neither is published on the product page.

Charging and pack integration

Charge CC-CV to 4.2 V within the current limits listed above and stop discharge at 2.5 V. These are unprotected industrial cells: a BMS or protection circuit is required, interconnects must be resistance or laser welded rather than soldered, and cells of different model, batch or state of charge must not be mixed in one pack. Charging below 0 °C is not permitted unless the pack implements a low-temperature charge strategy.

Certifications and documentation

UN38.3, MSDS, IEC 62133-2, CE, RoHS, REACH, PSE, KC. UN38.3 test summary, MSDS and the cell specification are available on request.

Packaging

Quantity per box200 pcs
Gross weight per box8.5 kg
Box dimensions350 × 250 × 150 mm

Specification basis: Model name corrected to NCA653864SA; official Panasonic capacity/dimensions, discharge TBC.

Preguntas sobre esta celda

6.50 mm thick in a 38.10 × 64.60 mm footprint, at 37.0 g with 2,400 mAh typical capacity.
Not published on the Panasonic product page. Confirm against the datasheet before setting BMS limits.
Prismatic cells are normally built into a frame or held under light compression to control swelling. Confirm the requirement in the datasheet.

Comparativa

Otras celdas Prismatic con las que comparar presupuesto

Modelo Marca Capacidad Descarga Ficha técnica
NCA103450 Panasonic 2,350 mAh — Pendiente

Las cifras de capacidad y descarga son los valores que constan para cada modelo; cuando no se dispone de la ficha técnica del fabricante, la fila figura como pendiente en lugar de presentarse como verificada.

Relacionado

Otras vías de búsqueda

Celdas 18650 Celdas 21700 Celdas 18500 y 22700 Todas las celdas Panasonic Guía de selección de celdas

¿Necesita NCA653864SA en volumen?

Confirme disponibilidad, documentación de lote y plazo de entrega antes de cerrar el diseño.

Solicitar presupuesto
WhatsApp