INR18650-P30S — célula de íon-lítio 18650
Molicel INR18650-P30S: 3,000 mAh typical (2,900 mAh minimum), 3.6 V nominal, 36 A discharge. 3,000 mAh at 36 A standard discharge with a 150 W maximum power rating at an 83 °C cut-off — the highest combined capacity-and-power figure in the Molicel 18650 line.
Especificações
Parâmetros da INR18650-P30S
| Parâmetro | Valor |
|---|---|
| Marca | Molicel |
| Modelo | INR18650-P30S |
| Formato | 18650 |
| Química | NMC |
| Tensão nominal | 3.6 V |
| Capacidade típica | 3,000 mAh / 10.8 Wh |
| Capacidade mínima | 2,900 mAh |
| Corrente de carga padrão | 3 A |
| Corrente de carga máx. | 6 A |
| Corrente de descarga | 36 A |
| Potência de pico na descarga | 150 W (max, 83 °C cut-off) |
| Resistência interna | AC 6.5 mΩ (30% SOC) · DC 14.5 mΩ (50% SOC) |
| Densidade de energia | 631 Wh/L · 234 Wh/kg |
| Peso | 48 g (Max) |
| Diâmetro | 18.6 mm (Max) |
| Altura | 65.2 mm (Max) |
| Temperatura de carga | -20 °C to 60 °C |
| Temperatura de descarga | -40 °C to 60 °C |
INR18650-P30S — specification and pack integration
3,000 mAh at 36 A standard discharge with a 150 W maximum power rating at an 83 °C cut-off — the highest combined capacity-and-power figure in the Molicel 18650 line.
What the numbers mean for a pack
- 3,000 mAh typical in a 18650 can, at 3.6 V nominal
- 36 A discharge ceiling — the pack design must hold the cell inside its temperature cut-off to use it
- 6 A maximum charge current sets the fastest realistic turnaround
- 631 Wh/L · 234 Wh/kg
- AC 6.5 mΩ (30% SOC) · DC 14.5 mΩ (50% SOC) — the figure that decides voltage sag under load
Where it is used
- Heavy-lift and cargo drones — 150 W peak per cell reduces parallel count
- Motorsport and off-road two-wheeler packs
- High-end garden and power tools running sustained heavy loads
Integration notes
Charge CC-CV to 4.2 V within the current limits above and stop discharge at 2.5 V. These are unprotected industrial cells: a BMS or protection circuit is required, interconnects must be resistance or laser welded rather than soldered, and cells of different model, batch or state of charge must not be mixed in one pack. Charging below 0 °C is not permitted unless the pack implements a low-temperature charge strategy.
Documentation
The manufacturer product data sheet for this model is available for download on this page. UN38.3 test summary, MSDS and transport documentation are supplied with shipment.
Specification basis: Molicel Product Data Sheet, model INR-18650-P30S (v1.1)
Comparar
Outras células 18650 para cotar em paralelo
| Modelo | Marca | Capacidade | Descarga | Ficha técnica |
|---|---|---|---|---|
| INR18650-30Q | Samsung SDI | 3,000 mAh | 15 A | Pendente |
| INR18650-P30B | Molicel | 3,000 mAh | 30 A | Em arquivo |
| NCR18650BD | Panasonic | 3,180 mAh | — | Pendente |
| INR18650-M30A | Molicel | 3,000 mAh | 10 A | Em arquivo |
Capacidade e descarga são os valores que temos para cada modelo; quando não há ficha técnica do fabricante em arquivo, a linha aparece como pendente em vez de verificada.
Aplicações
Regimes de descarga para os quais esta classe de célula é especificada
Relacionado
Onde mais procurar
Precisa de INR18650-P30S em volume?
Confirme disponibilidade, documentação de lote e prazo de entrega antes de fechar o projeto.