INR18650-P26A — célula de íon-lítio 18650
Molicel INR18650-P26A: 2,600 mAh typical, 3.6 V nominal, 35 A discharge. The balanced option in the Molicel 18650 power line: 2,600 mAh with 35 A maximum discharge and 6 A maximum charge, so packs gain current without dropping to 2,200 mAh.
Especificações
Parâmetros da INR18650-P26A
| Parâmetro | Valor |
|---|---|
| Marca | Molicel |
| Modelo | INR18650-P26A |
| Formato | 18650 |
| Química | NMC |
| Tensão nominal | 3.6 V |
| Capacidade típica | 2,600 mAh / 9.5 Wh |
| Corrente de carga padrão | 2.6 A |
| Corrente de carga máx. | 6.0 A |
| Corrente de descarga | 35 A |
| Resistência interna | AC ≤20 mΩ (1 kHz) |
| Densidade de energia | 535 Wh/L · 190 Wh/kg |
| Peso | 50 g (Max) |
| Diâmetro | 18.6 mm (Max) |
| Altura | 65.2 mm (Max) |
| Temperatura de carga | 0 °C to 60 °C |
| Temperatura de descarga | -40 °C to 60 °C |
INR18650-P26A — specification and pack integration
The balanced option in the Molicel 18650 power line: 2,600 mAh with 35 A maximum discharge and 6 A maximum charge, so packs gain current without dropping to 2,200 mAh.
What the numbers mean for a pack
- 2,600 mAh typical in a 18650 can, at 3.6 V nominal
- 35 A discharge ceiling — the pack design must hold the cell inside its temperature cut-off to use it
- 6.0 A maximum charge current sets the fastest realistic turnaround
- 535 Wh/L · 190 Wh/kg
- AC ≤20 mΩ (1 kHz) — the figure that decides voltage sag under load
Where it is used
- Professional cordless tools — 35 A headroom with more runtime than a 2.2 Ah cell
- E-bike and e-scooter packs with moderate peak demands
- Robotics and AGV axes with repeated torque events
Integration notes
Charge CC-CV to 4.2 V within the current limits above and stop discharge at 2.5 V. These are unprotected industrial cells: a BMS or protection circuit is required, interconnects must be resistance or laser welded rather than soldered, and cells of different model, batch or state of charge must not be mixed in one pack. Charging below 0 °C is not permitted unless the pack implements a low-temperature charge strategy.
Documentation
The manufacturer product data sheet for this model is available for download on this page. UN38.3 test summary, MSDS and transport documentation are supplied with shipment.
Specification basis: Molicel Product Data Sheet, model INR-18650-P26A (v1.4)
Comparar
Outras células 18650 para cotar em paralelo
| Modelo | Marca | Capacidade | Descarga | Ficha técnica |
|---|---|---|---|---|
| INR18650-25R | Samsung SDI | 2,500 mAh | 20 A | Pendente |
| INR18650-P28A | Molicel | 2,800 mAh | 35 A | Em arquivo |
| INR18650-30Q | Samsung SDI | 3,000 mAh | 15 A | Pendente |
| INR18650-P22S | Molicel | 2,200 mAh | 36 A | Em arquivo |
Capacidade e descarga são os valores que temos para cada modelo; quando não há ficha técnica do fabricante em arquivo, a linha aparece como pendente em vez de verificada.
Aplicações
Regimes de descarga para os quais esta classe de célula é especificada
Relacionado
Onde mais procurar
Precisa de INR18650-P26A em volume?
Confirme disponibilidade, documentação de lote e prazo de entrega antes de fechar o projeto.